Indkapsling/ beskyttelse

(IP-klasser)

The right enclosure class is a prerequisite for an electric motor to work safely for a long period of time in tough loads and harsh environments. The enclosure class is specified according to SS-EN 60034-5: 2000 with the designation IP (International Protection) followed by two digits, for example IP 54. See below for the meaning of the numbers.

BEVI's electric motors are normally in IP55 design, but can be delivered in most other designs on request.

Hjem / Virksomheden BEVI / Vidensbank / Indkapsling-beskyttelse

The first number - protection against touch and intrusion of objects

  • 0
    No special protection against involuntary or inadvertent contact with live or moving parts. No protection against intrusion of solid foreign objects.
  • 1
    Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50 mm in diameter.
  • 2
    Protection against fingers or other smaller objects (not greater than 12 mm in diameter).
  • 4
    Protection against solid objects larger than 1mm (wires, nails, screws, larger insects and other potentially invasive small objects such as tools/small etc).
  • 5
    Partial protection against dust that may harm equipment.
  • 6
    Totally dust tight. Full protection against dust and other particulates

The second number - protection against water

  • 0
    No protection.
  • 1
    Vertically falling water droplets must not cause harmful effects.
  • 2
    Water droplets falling within an angle of 15 degrees from the vertical must not cause harmful effects.
  • 3
    Water splashing from above and at an angle of 60 degrees from the vertical must not cause harmful effects.
  • 4
    Water splashes from all directionsmust not cause harmful effects.
  • 5
    Water spouting of lowpressurefrom all directions must not cause harmful effects.
  • 6
    Water from high seas must not enter the machine in harmful amounts.
  • 7
    Water must not enter the machine in harmful amounts when it is fully immersed in water under a certain amount of pressure and for a limited time.
  • 8
    Water must not enter the machine in harmful amounts when it isfully;immersedunder specified pressure and for an indefinite period of time.
Standard enclosure for BEVI's electric motors 

BEVI's electric motors are normally in IP55 design, but can be delivered in most other designs on request.

Kontakt os

Pontus Adolfsson, Produktchef elektriske motorer:

Relaterede produkter

Elmotorer

Læs mere

Elmotorer til eksplosionsfarligt miljø

Læs mere

BEVI vidensbank

BEVIs vidensbank indsamler information om vores ekspertiseområder, elektriske drev og elproduktion.

Udforske

BEVI er en af Nordens største virksomheder inden for elektriske drivsystemer og kraftproduktion. 

Vi tilbyder et omfattende udvalg af elektriske motorer, transmissionsenheder, kraftelektronik, viklingsmateriale, startudstyr og udfører service af elektriske maskiner.

Kontakt Danmark

BEVI A/S - Office/Administration:
Herstedvang 10 2.tv, DK-2620 Albertslund

Warehouse/pick up address: Herstedvang 10. Lager6, DK-2620 Albertslund

Mail: info@bevi.dk

© BEVI AB 2024